specification model APC-16-350 apc-16-700 dc voltage range rated current rated power output line regulation load regulation setup, rise time voltage range note.4 frequency range efficiency(typ.) ac current input inrush current(max.) leakage current working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing over voltage 12~48v 9~24v 350ma 700ma 16.8w 16.8w 300mvp-p 250mvp-p 5.0% 1.0% 3.0% 3000ms, 200ms / 230vac 3000ms, 200ms / 115vac at full load 47 ~ 63hz 84% 83% 0.3a/230vac;0.5a/115vac 0.25ma / 240vac -30 ~ 70 (refer to "derating curve") 20 ~ 90% rh non-condensing -40 ~ +80 , 10 ~ 95% rh 0.2%/ (0 ~ 50 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. derating may be needed under low input voltage. please check the static ch aracteristic for more details. 5. the power supply is considered as a component that will be operated in combi nation with final equipment. since emc performance will be affected by th e complete installation, the final equipment manufacturers must re- qualify emc directive on the complete installation again. 16w single output switching power supply constant current mode design universal ac input / full range protections:short circuit / over current / over voltage fully isolated plastic case small and compact size cooling by free air convection pass lps suitable for led lighting and moving sign applications 100% full load burn-in test low cost / high reliability 2 years warranty ripple & noise (max.) note.2 voltage tolerance note.3 environment safety & emc (note 5) protection file name: apc-16-spec 2011-07-09 safety standards withstand voltage isolation resistance i/p-o/p:3.75kvac hold up time (typ.) 20ms/230vac 12ms/115vac at full load 50.4~ 60v 27.6~ 33.5v protection type : shut off o/p voltage, clamping by zener diode 77*40*29(l*w*h) cold start 35a/115vac,70a/230vac design refer to tuv en60950-1, en61347-2-13, ul8750 1145.7k hrs min. mil-hdbk-217f (25j) 0.1kg; 120pcs/14kg/0.93cuft features : i/p-o/p:>100m ohms / 500vdc / 25 / 70% rh 90 ~ 264vac 127 ~ 370vdc a p c - 1 6 s e r i e s current accuracy 5.0% emc immunity compliance to en55015,en61000-3-2 class a,en61000-3-3 compliance to en61547,en61000-4-2,3,4,5,6,8,11; light indus try level(surge 2kv), criteria a emc emission lps 110 selv f
mechanical specification unit:mm derating curve static characteristics ambient temperature ( ) load (%) -30 0 10 20 30 40 50 70 20 40 60 80 100 (horizontal) block diagram detection pwm circuit emi filter power switch- filter & rectifiers +v -v i/p ing control 50 16w single output switching power supply a p c - 1 6 s e r i e s input voltage (vac) 60hz 90 100 200 220 210 230 250 240 264 load (%) 90 100 80 70 60 50 40 fosc : 67khz rectifiers 60 file name: apc-16-spec 2011-07-09 77 40 82.5 90 150 10 150 10 15.5 29 ul1569 20awg ul1569 18awg +v(red) -v(black) ac/n(blue) ac/l(brown) 19 31 t case t case: max. case temperature
|
